The Pros and Cons of Using Sliding Closet Doors
A sliding door price in Hot Springs Village is a great thing to have and many homeowners only realize how lucky they are when they finally moved into a house with a patio or backyard that has a sliding exterior door installed. Not only it looks great by enhancing tenfold the ambient of any room or backyard, but it is also very functional. Sliding patio doors are maybe one of the best types of exterior doors due to ease of getting in and out of the room through it.
Unfortunately this particular sliding door type has an ever recurring problem: it get stuck at times. This is why you need to learn how to fix a sticking patio sliding door. It is not difficult by any means, but you do need to have a bit of DIY knowledge and some basic home tools. The good news is that you can very easily remove the sliding patio doors by simply lifting them up and swinging them out from the aluminum bottom. Then all you need to do is follow the same procedure for the top part as well.
However why do patio sliding doors get stuck in the first place? Many times there is a malfunctioning of the gliding system. Sometimes though there is a corrosion of the hardware or maybe it’s simply tightened up. Depending on the cause, it can be easily fixed and adjusted. For example if it’s tightened, all you need to do is loosen up the screw that keeps the wheel in place. However when you do this make sure you do it gently with your tools because in case the material has become brittle over time, it might simply break when you handle it.
Sliding Closet Door Hardware For Innovative Designs
Barn door hardware is a unique and appealing new style of interior hardware for doors. But some have asked, "why is it called barn door hardware?" Upon first hearing the name, some may doubt its home interior applications.
As it turns out, this unique style of hardware is named for its original application. On large barns where particularly large doors were used, sometimes a sliding track system was used instead of a swinging hinge system for the doors.
With a hinge system, the size, weight, and overall mass of a door are born by just the hinges. That puts a lot of stress on small areas. Additionally, the vertical arrangement of the hinges causes an unequal amount of stress to be placed on the different hinges. This can over time cause the hinges to warp, bend, and even break if not properly treated. Also when a door is on hinges, it must swing out over a large area to move into the open position. This can sometimes be inconvenient and tedious, especially if you're trying to conserve on space.
More strength, more space, more overall ease of operation- that was why this style of hardware was developed and used. And that is where the name "barn door hardware" comes from.
You can easily find replacement rollers or glides at the local DIY hardware store and they are not expensive either, but as there are so many types available nowadays, you need to take your old one with you. Before you get a new one, first try to readjust the wheel and put back the door in its place. Give it a try and see if the problem has been fixed. If not, then that trip to the DIY store will need to be tackled next.
A Look at Sliding Doors
Many of people have sliding doors that open up to patios or backyards. These doors are an important part of our homes. They have aluminum tracks that let the door slide open and close. Over time, the aluminum tracks breakdown and the sliding door get stuck. The tracks are made from aluminum, which can become pitted and breakdown over time. Aluminum is a softer metal that it widely used because it is light weight, less expensive and adaptable. The manufacturer's coat the aluminum tracks to protect them from corrosion and wear. However, over time the coating is worn off from continually opening and closing,which exposes the track to pitting and breakdown.
Slider doors are frequently used, especially in summer month. With traffic going in and out of the house your sliding door can accumulate small stones, dirt and debris can get trapped in track and cause it to wear down over time. Moisture from weather conditions, such as snow, dew and rain can accumulate in the track and cause corrosion. Once these things happen the doors do not slide as easily and opening and closing making it a challenge.
7. Lubricate the new track for smooth opening and closing
8. Remove the old rollers by removing the frame lock screw, lift frame and then remove. Now slide the new rollers into place and re-install frame lock screw.
9. Re-install the sliding door and test the opening and closing.
As an additional note, it might be worth it to consider purchasing a manual retractable sliding door screen or motorized screen. This screen will allow you to keep your sliding door open in summer, but keep the bugs and insects out. These screens will retract back into their housing when not in use, but will cut down on the opening and closing of your sliding door.
Many times the gliders or rollers are simply full of dirt. Again, you can replace them, but first try to clean them as this might save you a buck or two. All you need to use is an old toothbrush (I collect my old toothbrushes just for emergency cleaning situations like this) and some spirit (or kerosene) to clean off the dirt from your rollers. As there is a danger of inhaling these fumes you should always work in a well ventilated place and make sure to use some rubber gloves. After you have cleaned, them lubricate them with any kind of grease you have around and try the sliding patio glass door again. It might just work this time.
Garage Doors - Upgrade Your Carport With Sliding Doors
Sliding barn door hardware, along with the barn doors, doesn't have to be for barns anymore. Today, barn doors on domestic living spaces are becoming extremely popular due to the aesthetic design and their space saving features. Instead of needing extra space to open a traditional door, barn doors can slide back and forth, eliminating the need for a large space.
Barn doors for indoor purposes can also create a very unique rustic look that can enhance the ambience of any room. There are several types of barn doors and hardware that can work with the design you want to create, including modern and industrial hardware. When considering barn doors for your next project, consider the following hardware and doors, as well as their purposes, so you can get the right products. All hardware packages come with mounting instructions, so you can get it right the first time.
Modern Sliding Door Hardware
What's Your Next Project?
While we know that sliding barn doors are not for everyone, we do realize that sliding doors can be useful in almost any application. With our quiet rollers, you can create a very nice entrance into a nursery or any bedroom, as well as in spaces where events are held. Or with our industrial sliding barn door hardware, you can create an industrial look that is becoming more popular in urban lofts. Any domestic residence or public space can benefit from our sliding barn door hardware. What's your next project?
Avoid Vinyl When Choosing A Patio Door
Barn door hardware is quickly gaining popularity. But why? Here we'll briefly touch on a few reasons.
Barn door hardware, also known as sliding door hardware or flat track hardware, has become a popular new alternative to pocket doors. There are several reasons for this, but here are just a few.
1) Solid Construction
Sliding hardware, given its traditional application as barn door hardware, is made of solid steel. The standard track is 2" wide by 1/4" thick, making it strong and durable. Standard track systems can bear doors that weigh up to 400lbs! Additionally, the bearings in the wheels of the door hangers are guaranteed lubricated for life. Essentially, these sliding door hardware systems are built to outlast the life of your home.
2) Sliding doors = exciting! Pocket doors = outdated!
Another finish that is popular is the Acrylic Clear Coat finish. The entire system, including the track and hangers, is coated in an acrylic clear coat that seals and protects the steel, while at the same time preserving the rustic nature of a raw mill steel look. This finish is just right for any door that has a slightly aged look to it. Dining rooms, bedrooms, and kitchens are popular destinations for hardware with this finish.
Barn door hardware is a unique trend that is growing fast. With as an exciting alternative to pocket doors with its solid construction and unique finishes, it is no wonder why homeowners and designers alike are turning to sliding door hardware for their doorway needs.